How To Using Hyperterminal in Linux (minicom)
8:03 PM 0 Comments

In this session i will explain you How To Using Hyperterminal in Linux, ok check this out:

Login as root
Connect to your device
type # minicom -o -s
and then will display this gui:
+-----[configuration]------+
| Filenames and paths |
| File transfer protocols |
| Serial port setup |
| Modem and dialing |
| Screen and keyboard |
| Save setup as dfl |
| Save setup as.. |
| Exit |
| Exit from Minicom |
+--------------------------+
Pointing to Serial port setup
And set to be here
+-----------------------------------------------------------------------+
| A - Serial Device : /dev/ttyUSB0 |
| B - Lockfile Location : /var/lock |
| C - Callin Program : |
| D - Callout Program : |
| E - Bps/Par/Bits : 9600 8N1 |
| F - Hardware Flow Control : Yes |
| G - Software Flow Control : No |
| |
| Change which setting? |
+-----------------------------------------------------------------------+
Type 'a' for setting Serial Device, you can set to:
/dev/ttyUSB0 or /dev/ttyUSB1 if using USB Port
/dev/ttyS0 or /dev/ttyS1 if using for Com Port
Type 'e' for Bps/Par/Bits, usualy set to 9600 8N1 (type 'c' and enter)
Press enter to front page and pointing to 'Save setup as dfl' and press enter
Pointing to exit for connect to device

Talk About Server